|
|
|
|
|
|
|
Introduction |
High temperature bath is suitable for calibration of temperature sensors, polymer studies etc. Polished stainless steel inner chamber, Mild steel outer chamber finished in pleasing two colour scheme. Glass wool insulation. Proportional, Fully solid state control of temperature. Fully automatic action. Fine control facility for high accuracy Pt-100 sensor. Combination Digital set point & readout with 13mm LED Immersion heater. Stirrer unit to maintain uniform tank temperature. Accuracy +/-0.5% of full scale +/-1 digit. Control Accuracy +/-0.1 deg C to +/- 1 Digit at 100 deg C. Working size : 250mm L X 200mm W X 200mm D |
|
|
|
|
| Maximum Temperature |
Resolution of Display |
| 1000C |
0.10C |
| 1990C |
0.10C |
| 3000C |
1.00C |
|
|
|
|
Accessories at extra cost |
-
Oil for use upto 199 deg C Petroleum based (Fuming likely above 120 deg C.)
-
Coil for circulation of chilled water
-
Calibration certificate traceable to national standard.
-
Resolution of 0.1 deg C for Max Temp. range of 300 deg C
|
|
|
