mor_testing_machine

MOR Testing Machine



Introduction	The machine consists of a load frame and motorized pumping unit. The lower platen has two rollers, the distance between which is adjustable. The upper platen has also roller. Micro-processor based Digital Load Indicator to indicate applied load is fitted in the Pumping unit. The Pumping unit is separate electrically operated, housed in a cabinet. On/Off switch and a slow/fast lever to control rate of loading are fitted on the front panel of the pumping unit. A micro switch and relay fitted inside the Digital Load indicator to protect the unit from over loading.

Optional Accessories	Max. Tile size 660 X 660mm Direct reading of total applied load in KN Direct reading of Flexural strength in N/mm2 - No calculation required Peak hold facility RS 232 interface (Optional - at extra cost) Direct analytical reports on computer (Optional) Auto generation of load/time graph. (Optional) Overload safety cut out Password protected Calibration to prevent Un authorized manipulation

Type of Pumping :	Electrical

Loading Range :	100 KN

Least Count :	0.1 KN

Optional Accessories at extra cost :	1) PC link software 2) Wireless PC link software